Wednesday, September 20, 2017
Have fun with our new page...
More of the best - Amiga games you must have seen, part 2
Sunday, September 17, 2017
Saturday, September 16, 2017
Disclaimer: This is not an instruction. Use at your own risk. No responsibility taken for whatever you do. Safety first. Kids, dont try this at home.
|Parts and BOM, and the shiny blue PCB.|
|Parts and tools.|
Soldering the first SMD chip on to the board quickly resulted in the chip being roasted, and the PCB damaged. Lol. Surprise. It turned out to be waaaaaay more difficult than I had expected.
Working with tiny SMD components poses some unexpected problems. For example if you're used to soldering hole-though parts you will most likely use way too much solder on your first attempts. Well, I did. Then, when you got used to using really very little solder, you find out that you cannot easily suck away the solder if you've made a mistake, because the amount of solder is too little for the desoldering pump to work on. Then you may learn the painful way that tiny PCB chip pins are reeaaally weak, you have to treat them really gently. And finally, when checking results of your soldering, you may find out that your grandma's magnifying glass does what it's supposed to do - to magnify - but it's scratched or unclear, and really creates more confusion than it does help.
|First chip in place. Dirty, but undamaged!|
|TF530r2 fully populated!|
If you wanna try to build one, here's Stephen Leary's first "how to" video (we're still waiting for the second):
Next time we need to find out if she's alive - watch out for part 4 of our series "Building the TerribleFire TF530 accelerator board"!
Overview and back catalogue of the series:
Friday, September 8, 2017
"AMIGA alive 03 - Juggler (1986) and BoingBall (1984)" is out! This time with a little history lesson: the legendary Juggler and BoingBall demos, shown in the early days of the Amiga, and responsible for stunning the audience. We hope you enjoy it, and as always comments are welcome!